Heating
Heating Controls / Programmers
PAGE 1 OF 1
Danfoss FP715-Si 2-Channel Programmer - 087N789800 ...
PRODUCT CODE: 087N789800
The FP715 Si two-channel full programmer has separate Heating and Hot Water outputs operating on completely independent time bases for maximum flexibility.
The FP715 Si can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and to provide either ...more >>
RRP £74.16 / Our Price £51.91 - SAVING £22.25 excl VAT
QTY:
Danfoss TS715-Si Single Channel Programmer - 087N789900 ...
PRODUCT CODE: 087N789900
RRP £58.46 / Our Price £40.92 - SAVING £17.54 excl VAT
QTY:
Honeywell 1 Day Single Channel Service Timer ST9100S ...
PRODUCT CODE: ST9100S1007
The ST9100S is a Service Interval time controller with additional features to help landlords comply with the requirements of Regulation 36 of the gas regulations 1998. The landlord, installer or service company can configure the Service Interval, the advance tenant notification period and how the controller will operate when the ...more >>
RRP £70.76 / Our Price £53.07 - SAVING £17.69 excl VAT
QTY:
Honeywell 1 Day Single Channel Timer ST9100A ...
PRODUCT CODE: ST9100A1008
ST9100A is a single channel timer, designed primarily for control of a single heating zone or combi boiler application. It is suitable for mains, low voltage, or potential-free switching of the heating load. This model is a 1 day timer with two on/off switchings times per day (which can be ...more >>
RRP £58.98 / Our Price £44.24 - SAVING £14.75 excl VAT
QTY:
Honeywell 1 Day Twin Channel Programmer ST9400A ...
PRODUCT CODE: ST9400A1002
ST9400A is a 2 channel programmer, designed for control of both heating and stored hot water in complete systems. The heating and hot water programmes are completely independent, to allow the system to be operated in the most energy efficient manner possible. The unit is a 1 day full programmer ...more >>
RRP £83.38 / Our Price £62.54 - SAVING £20.85 excl VAT
QTY:
Honeywell 1 Day Twin Channel Service Programmer ST9400S ...
PRODUCT CODE: ST9400S1001
ST9400S 1 Day Service Programmer
The ST9400S Service Interval time controller has additional features to help landlords comply with the requirements of Regulation 36 of the gas regulations 1998. The landlord, installer or service company can configure the Service Interval, the advance tenant notification period and how the controller will operate ...more >>
RRP £100.06 / Our Price £75.05 - SAVING £25.02 excl VAT
QTY:
Honeywell 24 Hour Standard Programmer ST699 ...
PRODUCT CODE: ST699B1002
The ST699 time control programmer can be used as a replacement programmer on gravity primary or fully pumped systems. The ST699 has a proven easy to use design. The front panel of the programmer will fit to the same backplate. Programming the timing sequence is straightforward, using the top slider ...more >>
RRP £111.74 / Our Price £83.81 - SAVING £27.94 excl VAT
QTY:
Honeywell 7 Day 2-Zone Programmer ST9500C ...
PRODUCT CODE: ST9500C1015
ST9500C is a 2 channel 7 day full programmer designed to control 2 heating zones. Zoning a house not only helps make the heating system more energy efficient, but can also improve comfort conditions, as each zone will only be heated when required.
This programmer gives great flexibility offering up ...more >>
RRP £90.10 / Our Price £67.58 - SAVING £22.53 excl VAT
QTY:
Honeywell 7 Day Single Channel Timer 3-On/Off's ST9100C ...
PRODUCT CODE: ST9100C1006
ST9100C is a single channel timer, designed primarily for control of a single heating zone or combi boiler application. It is suitable for mains, low voltage, or potential-free switching of the heating load. This model is a 7 day timer that gives great flexibility offering up to three on/off switchings ...more >>
RRP £69.06 / Our Price £51.80 - SAVING £17.27 excl VAT
QTY:
Honeywell 7 day Standard Programmer ST799 ...
PRODUCT CODE: ST799A1003
The ST799 time control programmer can be used as a replacement programmer on gravity, primary or fully pumped systems. The ST799 offers a flexible 7 day programme. The front panel of the programmer will fit to the same backplate.
Programming the timing sequence is straightforward, using the top slider switch ...more >>
RRP £119.18 / Our Price £89.39 - SAVING £29.80 excl VAT
QTY:
Honeywell 7 Day Twin Channel Programmer 3-On/Off's ST9400C ...
PRODUCT CODE: ST9400C1000
ST9400C is a 2 channel programmer, designed for control of both heating and stored hot water in complete systems. The heating and hot water programmes are completely independent, to allow the system to be operated in the most energy efficient manner possible.
This unit is a 7 day full programmer ...more >>
RRP £90.10 / Our Price £67.58 - SAVING £22.53 excl VAT
QTY:
PAGE 1 OF 1